Page 8 - ATP PACKS_2016
P. 8
ATP® PACK 06 ROOMS FROM
17 TO 30 M2
Packs
2009 06
VELVETY
FINISHING
EXCELLENCE STANDARD
Sabine: 0.25 sec Sabine: 0.25 sec
DESCRIPTION ABSORPTION COEFFICIENT AND GRAPHIC
ATP® PACK 06 was developed by JOCAVI® to fulfil and achieve a compromise between aesthetics and 1,0 RT [s] Excellence / VELVETY
acoustics in Home Cinemas and private Home Theatres applications. STANDARD / FOAM
ATP® PACK 06 is a new set of acoustic panels prepared for mid-size rooms and based on the room 0,8
dimensions of previous ATP® PACK 03. Freq[Hz]
Despite the intentional non-inclusion of low frequency absorbent panels in this pack, the presence of 0,6
this set of panels, helps to enhance, in the most real way, the sound produced by its system and to 250 500 1000 2000 4000
optimise the acoustic coupling between the listener and the speakers, while minimising the SBIR and 0,4
the modal emphasis to produce a frequency response as flat as possible in the room. 125 Hz 250 Hz 500 Hz 1 Khz 2 Khz 4 Khz RT60
As the others ATP® PACKS, ATP® PACK 06 is available in two options: Standard and Excellence. The 0,2 0.58 0.36 0.24 0.21 0.23 0.22 0.25
Standard is composed only by standard acoustic foam panels while the Excellence version is available 0.60 0.38 0.25 0.21 0.22 0.21 0.25
with the same acoustic models but with our new finishing: velvety. 0
It is a very practical assembly kit and is provided with assembly instructions, as well as the glues and 125
tools which are necessary to install the acoustic modules.
FREQUENCY
WHERE TO APPLY : aS
Rooms with an area between: 17 and 30 square meters. aS
Rooms with volumes between: 45 and 58 cubic meters.
For use in medium-size home-theatre rooms, home-studios, Hi-Fi rooms, listening rooms, etc. PACK QUANTITIES
FEATURES REFERENCE PANELS UNITS DIFFUSOR ABSORBENT TUNED
SF2060 SEAFOAM SF2 60 DIFFUSOR ABSORBENT TUNED
• Values were obtained by simulation in specific JAS® software and later confirmed T4S060 16
through acoustic analyses in the rooms. TRAP 40 S
UNITS
• The simulated and tested rooms are totally empty, and only the referred REFERENCE PANELS 60 ATP® PACK 06
ATP® PACK 06 acoustic panels are applied. SF2060 SEAFOAM SF2 8
T4S120
• Traditional construction room with dimensions: (L,W,H): 4.90m / 3.60m / 2.80m. TRAP 40 S
Walls: masonry with painted fine stuff and a wooden door.
Ceiling: 12 mm - thick plaster.
Floor: natural floating parquet.
REGULAR FOAM COLOURS VELVETY COLOURS
CREAM GREY RED BLUE GREY BEIGE BLACK WHITE
Regular Foam Regular Foam
IMPORTANT NOTICES 101
• JOCAVI® accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require.
• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.
• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range.
• Typical Indoor Comfort Standards state a temperature range of 20ºC - 27ºC (68ºF - 81ºF), and a relative humidity of less than 60%. These would be considered as normal operational levels of JOCAVI® products' range.
• Despite all the standard sizes of all products, this model can be customised upon previous consultation. Sizes may vary slightly due to their production method and some inherent raw-materials characteristics.