Page 4 - ATP PACKS_2016
P. 4
ATP® PACK 02 ROOMS FROM
13 TO 17 M2
Packs
2009 02
EXCELLENCE STANDARD
Sabine: 0.53 sec Sabine: 0.53 sec
DESCRIPTION ABSORPTION COEFFICIENT AND GRAPHIC
While some customers favour the ATP® PACK 01 acoustic panel set, others certainly need an answer 1,0 RT [s] Excellence
for their larger-sized rooms. The ATP® PACK 02 acoustic panel set has been designed for rooms STANDARD
measuring between 13 and 17 square metres. The approach consists in adjusting the room 0,8
dimensions to sizes which are slightly bigger than the size of the ATP® PACK 01. Freq[Hz]
The acoustic treatment modules must also be placed in relation to the listener and the speakers, while 0,6
minimising the SBIR and the modal emphasis to produce a frequency response as flat as possible in the 250 500 1000 2000 4000
room. 0,4
Given the elegant look of these Acoustic Elements, most of our customers prefer to leave them in sight 125 Hz 250 Hz 500 Hz 1 Khz 2 Khz 4 Khz RT60
as if they were acoustic sculptures. 0,2 0.66 0.58 0.54 0.50 0.46 0.45 0.53
In a practical way, ATP® PACKS have been designed for small-sized rooms. They are easily assembled 0.69 0.55 0.52 0.50 0.48 0.43 0.53
and all accessories needed are included.You can choose from the two ATP® PACK 02 available 0
solutions: STANDARD or EXCELLENCE, depending on your needs and aesthetic taste. 125
All packs are supplied with assembly instructions, as well as the glues and tools which are necessary
to install the acoustic modules. FREQUENCY
aS
WHERE TO APPLY : aS
Rooms with an area between: 13 and 17 square meters.
Rooms with volumes between: 35 and 45 cubic meters. PACK QUANTITIES
For use in small-sized home-theatre rooms, home-studios, Hi-fi rooms or instrument rooms.
REFERENCE PANELS UNITS DIFFUSOR ABSORBENT TUNED
FEATURES WAV060 / WAI060 WAVYFUSER/INV 12 DIFFUSOR ABSORBENT TUNED
FSO060 / FSI060 FOAMSORB/INV 12
• Values were obtained by simulation in specific JAS® software and later confirmed 8
through acoustic analyses in the rooms. T3S120 TRAP 30S
UNITS
• The simulated and tested rooms are totally empty, and only the referred REFERENCE PANELS 12
ATP® PACK 02 acoustic panels are applied. STS120 STRIPESORB 8
T3S120
• Traditional construction room with dimensions: (L,W,H): 4.31m / 3.58m / 2.80m. TRAP 30S
Walls: masonry with painted fine stuff and a wooden door.
Ceiling: 12 mm - thick plaster.
Floor: natural floating parquet.
BEIGE
Similar to
RAL 1011
YELLOW
Similar to
RAL 1003
ORANGE
Similar to
RAL 2001
RED
Similar to
RAL 3003
PURPLE
Similar to
RAL 4007
LIGHT BLUE
Similar to
RAL 5010
BLUE
Similar to
RAL 5013
GREEN
Similar to
RAL 6028
BROWN
Similar to
RAL 8019
LIGHT GREY
Similar to
RAL 7001
GREY
Similar to
RAL 7015
BLACK
Similar to
RAL 9005
WHITE
Similar to
RAL 9003
ATP® PACK 02
STANDARD EPS RAL COLOURS REGULAR FOAM COLOURS
CREAM GREY
Regular Foam Regular Foam
IMPORTANT NOTICES 97
• JOCAVI® accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require.
• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.
• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range.
• Typical Indoor Comfort Standards state a temperature range of 20ºC - 27ºC (68ºF - 81ºF), and a relative humidity of less than 60%. These would be considered as normal operational levels of JOCAVI® products' range.
• Despite all the standard sizes of all products, this model can be customised upon previous consultation. Sizes may vary slightly due to their production method and some inherent raw-materials characteristics.