Page 6 - ATP PACKS_2016

ATP® PACK 04 ROOMS FROM
24 TO 30 M2
Packs
2009 04

EXCELLENCE STANDARD

Sabine: 0.50 sec Sabine: 0.54 sec

DESCRIPTION ABSORPTION COEFFICIENT AND GRAPHIC

The ATP® PACK 04 is specific for large-sized music rooms, as it was designed for rooms measuring 1,0 RT [s] Excellence
between 24 and 30 square metres. STANDARD
You can choose from the two ATP® PACK 04 available solutions: STANDARD or EXCELLENCE, 0,8
depending on your needs and aesthetic taste. Freq[Hz]
It provides acoustic comfort in control room studios, recording rooms, hi-fi or home-cinema rooms, 0,6
rehearsal rooms, etc. It uses low-frequency tuned modules, BKA120 and BKW120, which are duly 250 500 1000 2000 4000
balanced with the absorbers and diffusers FSO060 and WAV060, as pictures show. 0,4
The application of the low-frequency tuned absorbers in the corners of the room and on the walls is 125 Hz 250 Hz 500 Hz 1 Khz 2 Khz 4 Khz RT60
mandatory, in this case, to hold the energy at low frequencies. 0,2 0.55 0.52 0.52 0.50 0.47 0.45 0.50
The integration of the acoustic modules, sound system and listener is decisive for a good audition, 0.77 0.57 0.52 0.50 0.48 0.42 0.54
therefore minimising the differences in the distribution of the acoustic pressure and minimising the 0
modal emphasis and SBIR (speaker-boundary interference response). Give your ears an opportunity 125
and see how the performance of your sound system improves.
WHERE TO APPLY : FREQUENCY
Rooms with an area between: 24 and 30 square meters. aS
Rooms with volumes between: 58 and 90 cubic meters. aS
For use in control room studios, tracking rooms, hi-fi or home-cinema rooms, rehearsal rooms, etc.
PACK QUANTITIES
FEATURES
REFERENCE PANELS UNITS DIFFUSOR ABSORBENT TUNED
• Values were obtained by simulation in specific JAS® software and later confirmed WAV060 / WAI060 WAVYFUSER/INV 24 DIFFUSOR ABSORBENT TUNED
through acoustic analyses in the rooms. FSO060 / FSI060 FOAMSORB/INV 24
BASSKEEPER ANGLE 8
• The simulated and tested rooms are totally empty, and only the referred BKA120 BASSKEEPER WALL 8
ATP® PACK 04 acoustic panels are applied. BKW120
UNITS
• Traditional construction room with dimensions: (L,W,H): 6.52m / 4.48m / 2.80m. 28
Walls: masonry with painted fine stuff and a wooden door. 8
Ceiling: 12 mm - thick plaster.
Floor: natural floating parquet.
BEIGE REFERENCE PANELS
Similar to STS120 STRIPESORB
RAL 1011 T3S120
YELLOW TRAP 30S
Similar to
RAL 1003
ORANGE
Similar to
RAL 2001

RED
Similar to
RAL 3003
PURPLE
Similar to
RAL 4007
LIGHT BLUE
Similar to
RAL 5010

BLUE
Similar to
RAL 5013

GREEN
Similar to
RAL 6028
BROWN
Similar to
RAL 8019
LIGHT GREY
Similar to
RAL 7001

GREY
Similar to
RAL 7015

BLACK
Similar to
RAL 9005

WHITE
Similar to
RAL 9003

ATP® PACK 04
STANDARD EPS RAL COLOURS REGULAR FOAM COLOURS

CREAM GREY
Regular Foam Regular Foam

IMPORTANT NOTICES 99

• JOCAVI® accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require.
• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.
• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range.
• Typical Indoor Comfort Standards state a temperature range of 20ºC - 27ºC (68ºF - 81ºF), and a relative humidity of less than 60%. These would be considered as normal operational levels of JOCAVI® products' range.
• Despite all the standard sizes of all products, this model can be customised upon previous consultation. Sizes may vary slightly due to their production method and some inherent raw-materials characteristics.