Page 3 - ATP PACKS_2016
P. 3
ATP® PACK 01 ROOMS FROM
9 TO 13 M2
Packs
2009 01
EXCELLENCE STANDARD
Sabine: 0.52 sec Sabine: 0.52 sec
DESCRIPTION ABSORPTION COEFFICIENT AND GRAPHIC
According to the audio and home cinema fans designation, home cinema and studios is a system 1,0 RT [s] Excellence
designed to be assembled in the average rooms of anyone's house. Usually, these rooms have neither STANDARD
the correct dimensional proportions nor the ideal acoustic conditioning materials for a good audition. 0,8
This assembling example, the ATP® PACK 01 acoustic panel set, has been designed for rooms Freq[Hz]
measuring between 9 and 13 square metres. It optimises the placement of the acoustic treatment 0,6
components, the listener and the electro acoustic equipment, while minimising the SBIR and the modal 250 500 1000 2000 4000
emphasis to produce the best frequency response in the room. 0,4
To simplify the room design, JOCAVI® developed the ATP®PACK 01 for small home cinema and music 125 Hz 250 Hz 500 Hz 1 Khz 2 Khz 4 Khz RT60
rooms with the aim to obtain an authentic acoustic framing, by correcting and arranging the sound 0,2 0.62 0.56 0.53 0.50 0.46 0.45 0.52
perceptibility in your room. You can choose from the two ATP® PACK 01 available solutions: 0.64 0.53 0.52 0.50 0.47 0.43 0.52
STANDARD or EXCELLENCE, depending on your needs and aesthetic taste. 0
In a practical way, ATP® PACKS are designed for small-sized rooms. The acoustic elements remain 125
exposed. They are easily assembled and all accessories needed are included.
Give your ears an opportunity to see how the performance of your sound system improves. FREQUENCY
aS
WHERE TO APPLY : aS
Rooms with an area between: 9 and 13 square meters.
Rooms with volumes between: 22 and 35 cubic meters. PACK QUANTITIES
For use in small-sized home-theatre rooms, home-studios, Hi-fi rooms or instrument rooms.
REFERENCE PANELS UNITS DIFFUSOR ABSORBENT TUNED
FEATURES WAV060 / WAI060 WAVYFUSER/INV 8 DIFFUSOR ABSORBENT TUNED
FSO060 / FSI060 FOAMSORB/INV 8
• Values were obtained by simulation in specific JAS® software and later confirmed 8
through acoustic analyses in the rooms. T3S120 TRAP 30S
UNITS
• The simulated and tested rooms are totally empty, and only the referred 8
ATP® PACK 01 acoustic panels are applied. 8
• Traditional construction room with dimensions: (L,W,H): 3.47m / 2.85m / 2.50m.
Walls: masonry with painted fine stuff and a wooden door.
Ceiling: 12 mm - thick plaster.
Floor: natural floating parquet.
ATP® PACK 01 REFERENCE PANELS
BEIGE STS120 STRIPESORB
Similar to T3S120
RAL 1011 TRAP 30S
YELLOW
Similar to
RAL 1003
ORANGE
Similar to
RAL 2001
RED
Similar to
RAL 3003
PURPLE
Similar to
RAL 4007
LIGHT BLUE
Similar to
RAL 5010
BLUE
Similar to
RAL 5013
GREEN
Similar to
RAL 6028
BROWN
Similar to
RAL 8019
LIGHT GREY
Similar to
RAL 7001
GREY
Similar to
RAL 7015
BLACK
Similar to
RAL 9005
WHITE
Similar to
RAL 9003
STANDARD EPS RAL COLOURS REGULAR FOAM COLOURS
CREAM GREY
Regular Foam Regular Foam
96 IMPORTANT NOTICES
• JOCAVI® accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require.
• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.
• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range.
• Typical Indoor Comfort Standards state a temperature range of 20ºC - 27ºC (68ºF - 81ºF), and a relative humidity of less than 60%. These would be considered as normal operational levels of JOCAVI® products' range.
• Despite all the standard sizes of all products, this model can be customised upon previous consultation. Sizes may vary slightly due to their production method and some inherent raw-materials characteristics.