Page 5 - IN_2016
P. 5
AIRperf®
ABSORBENT PANEL
PERFORATED METAL
DESCRIPTION TECHNICAL DRAWINGS Image of 120x60cm model Ref.:MTPF100Q.
JOCAVI® has developed this range of acoustic absorbent panels, mainly meant for HORIZONTAL INSTALLATION
stadiums, large halls, airports, subways and bus stations, as well as for industrial DIAGRAM
applications. It can also be applied in moist environments and outdoors.
45º SUSPENSION INSTALLATION
This panel's structure is made on a perforated metal lacquered plate, which gives the DIAGRAM
product a good robustness; the interior is built by combining absorbent raw materials
made from mineral fibers in different layers and densities. These products are applicable
to ceilings and suspended with the provided accessories.
The typical public and industrial spaces require an adequate planning of acoustics in
order to provide good sound reception. Due to its composite absorption layer, the
AIRperf® has a good absorption coefficient in mid and mid-low spectrum, which is very
important to reduce the airborne noise in the frequencies common noise range.
AIRperf® | ABSORBENT PANEL 120 10
60
VERTICAL SUSPENSION
INSTALLATION
DIAGRAM
FEATURES MODELS AND SIZES
• Made of metal lacquered plate and different raw absorbent materials inside. MODELS HEIGHT WIDTH DEPTH WEIGHT
• NRC: 0.76/m2. 60 cm 10 cm 7.1 Kg
• Fire-resistance: B-s1,d1 (similar to old M1). MTPF100Q 120 cm
• Several combinations and positionings: vertical, horizontal and 45º.
• Good robustness and airborne noise control.
• Suitable for areas with large space, subways, stadiums, airports and bus
stations, pavilions as well as for public or industrial facilities.
ABSORPTION COEFFICIENT 0.76
aS 0.02 0.06 0.10 0.20 0.54 0.48 0.44 0.45 0.60 0.71 0.78 0.89 0.91 0.97 0.92 0.88 0.84 0.80 0.73 0.69 0.67 0.66 0.60 0.59
1.4
1.2
1.0
0.8
0.6
0.4
0.2
Hz 50 63 80 100 125 160 200 250 315 400 500 630 800 1k 1.25k 1.6k 2k 2.5k 3.15k 4k 5k 6.3k 8k 10k NRC
ABSORPTION COEFFICIENT: Values in accordance with the standards: EN 20654, ASTM C423 and EN 11654. Values [<100Hz and > 5K] are Non Standard Values.
STANDARD COLOURS
BEIGE GREY BLACK WHITE
112 IMPORTANT NOTICES
• JOCAVI® accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require.
• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.
• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range. Close attention must be paid to the storage conditions and the acclimatization before, during and after the installation.
• Typical Indoor Comfort Standards state a temperature range of 20ºC - 27ºC (68ºF - 81ºF), and a relative humidity of less than 60%. These would be considered as normal operational levels of JOCAVI® products' range.
• Despite all the standard sizes of all products, this model can be customised upon previous consultation. Sizes may vary slightly due to their production method and some inherent raw-materials characteristics.