Page 4 - IN_2016

AIRflat®

ABSORBENT PANEL

DESCRIPTION TECHNICAL DRAWINGS Image of 120x60cm model Ref.:MTAF050
60
The AIRflat® is an additional option as an absorption panel. This panel's structure is 120
made on an aluminum frame, which gives the product a good robustness; the absorbent HORIZONTAL INSTALLATION 5
layer is built in a mineral fiber plate with viselike fabric that makes the finishing.
DIAGRAM
It is mainly meant for stadiums, large halls, airports, subways and bus stations, as well
as for industrial applications. It can also be applied in moist environments or outdoors.
The AIRflat® is available in several colors with the same acoustic features. It is easy to
install hanging on ceilings.
The typical public and industrial spaces require an adequate planning of acoustics in
order to provide good noise control and sound reception. This product provides a good
absorption coefficient at mid frequency range, exactly within the area where the largest
common noise occur.

FEATURES MODELS AND SIZES

• Made on an aluminium frame and different raw absorbent materials inside. MODELS HEIGHT WIDTH DEPTH WEIGHT
• NRC: 0.66/m2. 60 cm 5 cm 4 Kg
• Fire-resistance: B-s1,d1 (similar to old M1). MTAF050 120 cm
• Several combinations and positioning.
• Good robustness and airborne noise control.
• Can be used in different environments.
• Suitable for areas with large space, subways, stadiums, airports and bus

stations, pavilions as well as for public or industrial facilities.

ABSORPTION COEFFICIENT 0.66 AIRflat® | ABSORBENT PANEL

aS 0.01 0.07 0.08 0.13 0.26 0.31 0.36 0.36 0.48 0.55 0.63 0.74 0.78 0.79 0.83 0.84 0.86 0.85 0.71 0.65 0.63 0.59 0.58 0.55 VERTICAL

1.4
1.2
1.0
0.8
0.6
0.4
0.2

Hz 50 63 80 100 125 160 200 250 315 400 500 630 800 1k 1.25k 1.6k 2k 2.5k 3.15k 4k 5k 6.3k 8k 10k NRC

ABSORPTION COEFFICIENT: Values in accordance with the standards: EN 20654, ASTM C423 and EN 11654. Values [<100Hz and > 5K] are Non Standard Values.

STANDARD COLOURS

BLACK GREY WHITE 111

IMPORTANT NOTICES

• JOCAVI® accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require.
• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.
• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range. Close attention must be paid to the storage conditions and the acclimatization before, during and after the installation.
• Typical Indoor Comfort Standards state a temperature range of 20ºC - 27ºC (68ºF - 81ºF), and a relative humidity of less than 60%. These would be considered as normal operational levels of JOCAVI® products' range.
• Despite all the standard sizes of all products, this model can be customised upon previous consultation. Sizes may vary slightly due to their production method and some inherent raw-materials characteristics.