Page 10 - IN_2016
P. 10
WOODFACE® 1624
ABSORBENT PANEL
WOOD Image of 120x60cm model Ref.:WP1624 (on the left) and applied (ambient image).
DESCRIPTION TECHNICAL DRAWINGS
WOODFACE® 1624 is a wooden construction finishing material with acoustic absorbing 60
properties. Following an ecological philosophy, this line of acoustic treatment materials was
exclusively developed from recycled pressed wood fibers (HMDF) and coconut fibers, which 120 3,5
are recycled materials.
This line of products provides a practical and efficient solution for acoustic treatment. It is PERFORATION • Straight line of holes.
composed of coconut fiber (as an energy absorbent material) and perforated panels made of DETAILS • 24mm: hole center distance.
pressed wood fiber (as a finishing surface). This compound, made of strictly 100% recycled • 16mm: hole diameter.
materials, has an excellent technical performance. The coconut fiber is a natural, renewable • 18mm: board thickness WOODFACE® 1624 | ABSORBENT PANEL
and very light vegetal material. It has high porosity (95% of pores), which translates into an • Perforation rate: 34.8%
extremely high absorption of sound energy.
The good behavior of the recycled wood fibers, associated with the coconut fiber's micro- MODELS AND SIZES
porous absorbent properties, makes it a natural first-class combination in terms of acoustic
solutions. MODELS HEIGHT WIDTH DEPTH WEIGHT
The WOODFACE® is ideal for installing in auditoriums, conference rooms, sport pavilions, 2.5 Kg
business spaces, restaurants and bars, etc… It can be installed with normal wood-stripes or WP1624 120 cm 60 cm 3,5 cm
with the supplied aluminum interconnection bar.
OTHER SIZES AVAILABLE UNDER CONSULTING
FEATURES
• Standard perforations / wood finishings and coconut fibres (coir fibres).
• Uses 95% of recycled materials.
• NRC: 0.64/m2.
• Fire-resistance: Wood Veneer Faced (or Engineered Coloured Fibre) Boards - Euroclass
B-s2,d0 (similar to old M1), Coconut (Coir Fibre) - Euroclass E (similar to old M4).´
• Installation: wood or metal bars.
• Others sizes are available on demand.
ABSORPTION COEFFICIENT 0.64
aS 0.01 0.04 0.07 0.08 0.16 0.16 0.32 0.35 0.34 0.46 0.56 0.72 0.82 0.92 0.96 0.90 0.74 0.67 0.65 0.73 0.97 0.96 0.88 0.80
1.4
1.2
1.0
0.8
0.6
0.4
0.2
Hz 50 63 80 100 125 160 200 250 315 400 500 630 800 1k 1.25k 1.6k 2k 2.5k 3.15k 4k 5k 6.3k 8k 10k NRC
ABSORPTION COEFFICIENT: Values in accordance with the standards: EN 20654, ASTM C423 and EN 11654. Values [<100Hz and > 5K] are Non Standard Values.
STANDARD FINISHINGS AND COLOURS
BEECH OAK CHERRY SUCUPIRA BLACK GREY WHITE
IMPORTANT NOTICES 117
• JOCAVI® accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require.
• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.
• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range.
• Due to its natural origin, wood-based products will always present natural imperfections inherent to the organic nature. And for similar reasons, they will also present traces of old-age in the course of time.
• Wood and Fabric products are highly susceptible to change its appearance with humidity and temperature. Close attention must be paid to the storage conditions and the acclimatization before, during and after the installation.
• Typical Indoor Comfort Standards state a temperature range of 20ºC - 27ºC (68ºF - 81ºF), and a relative humidity of less than 60%. These would be considered as normal operational levels of JOCAVI® products' range.
• Despite all the standard sizes of all products, this model can be customised upon previous consultation. Sizes may vary slightly due to their production method and some inherent raw-materials characteristics.