Page 14 - JOCAVI_catalogue_2016

RIPPLE®

DIFFUSION PANEL

DESCRIPTION TECHNICAL DRAWINGS Image of 60x60cm model Ref.:RPL060.
60
The RIPPLE® was especially designed to have both absorption and diffusion features,
balancing these two assets perfectly. It has a great diffusion pattern as well as very interesting 60 12
and particular absorption characteristics.
The RIPPLE® is an essential product when you require a magnificent and controlled MODELS AND SIZES
high-frequency sound, adding at the same time some absorption to the mid-range of the sound
spectrum. MODELS HEIGHT WIDTH DEPTH WEIGHT
The RIPPLE® enables us to create uniform surfaces with a single model that softly absorbs the 60 cm 12 cm 4.5 Kg
sound waves while maintaining the vivacity of the musical instr uments' harmonics, which is RPL060 60 cm
very important for live and recording mixing techniques.
Thus, if you are looking for a superb sound in a room, without compromising absorption, you
will certainly reach the required acoustics with this product, by adding a few pieces of
low-frequencies bass traps as well.
The most suitable application areas for this product are: music studio rooms, piano and
acoustic instruments rooms, live rooms in general, auditoriums, theatres as well as all the
spaces that need specific care on sound intelligibility.

FEATURES

• Manufactured with ABS and high-quality fabric.
• Average diffusion: 0.59/m2 [>100Hz;<5KHz].
• NRC: 0.39/m2.
• Fire-resistance: VO - UL94 standards (similar to M2).
• Recyclable.
• Installation: accessories included.
• Several colours available..

DIFFUSION - ABSORPTION COEFFICIENT 0.59 DIFFUSION PANEL

0.10 0.11 0.12 0.31 0.34 0.35 0.37 0.44 0.47 0.54 0.58 0.61 0.68 0.73 0.74 0.77 0.77 0.81 0.79 0.82 0.85 0.83 0.80 0.78

aS 0.00 0.03 0.05 0.11 0.14 0.18 0.24 0.33 0.38 0.42 0.46 0.53 0.46 0.44 0.39 0.37 0.33 0.28 0.23 0.25 0.26 0.24 0.23 0.24 0.39

1.4
1.2
1.0
0.8 DIFFUSION
0.6

0.4
0.2 ABSORPTION

Hz 50 63 80 100 125 160 200 250 315 400 500 630 800 1k 1.25k 1.6k 2k 2.5k 3.15k 4k 5k 6.3k 8k 10k AVERAGE ®RIPPLE |
/NRC
ABSORPTION COEFFICIENT: Values in accordance with the standards: EN 20654, ASTM C423 and EN 11654.
DIFFUSION COEFFICIENT: These values were obtained by mathematical calculations and tests carried out in our laboratory. Values [<100Hz and > 5K] are Non Standard Values.

STANDARD ABS COLOURS

YELLOW ORANGE RED GREEN BLUE PURPLE LILAC BROWN CREAM BLACK LIGHT GREY WHITE
Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to
RAL 1003 RAL 2008 RAL 3001 RAL 6001 RAL 5013 RAL 4005 RAL 4009 RAL 8017 RAL 1001 RAL 9005 RAL 7042 RAL 9003

IMPORTANT NOTICES

• JOCAVI® accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require. 15
• RAL© is an international independent colour standard system partner for industry, trade, architecture and design. Should be consulted before placing any order.

• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.

• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range.
• Typical Indoor Comfort Standards state a temperature range of 20ºC - 27ºC (68ºF - 81ºF), and a relative humidity of less than 60%. These would be considered as normal operational levels of JOCAVI® products' range.

• Sizes may vary slightly due to their production method and some inherent raw-materials characteristics.