Page 15 - ATP_Products_2016
P. 15
FOAMSORB®/INVERTED
ABSORBENT PANEL
DESCRIPTION Image of 60x60cm models Ref.:FSO060 and Ref.:FSI060 (on the left) and Ref.:FSO060 and Ref.:FSI060 applied (ambient image).
TECHNICAL DRAWINGS
The FOAMSORB INV® absorption panels are ATP® registered products and the real mid- 120 120
range absorbers from our collection. They are made of high-quality controlled-cell, self- 60 60
extinguishable M1 fire-retardant acoustic foam.
The FOAMSORB INV® panels present a unique and elegant design; the male and female
pieces help solve many of the rooms' acoustic anomalies.
These panels have a high absorption coefficient in the broad range of the sound
spectrum, and are significantly efficient at absorbing medium-low frequencies.
In general terms, they work well on flat walls and ceilings. They can be combined with
the WAVYFUSER INV® diffusion panels, which have the same shape, thus giving music
rooms a truly balanced continuous acoustic treatment surface and a fine-looking
design.
60 13 60 12
ABSORBENT PANEL FEATURES MODELS AND SIZES
• Raw material: Melamine Foam or Regular Acoustic Foam. MODELS HEIGHT WIDTH DEPTH WEIGHT
• NRC: 0.95/m2 [>250Hz;<10KHz]. 60 cm 13/12 cm 1.2 Kg
• MELAMINE FOAM - Flame resistance: Euroclass B-s1,d0 (similar to old M1 France, FSO/I120 120 cm 60 cm 13/12 cm 0.6 Kg
FSO/I060 60 cm
Germany B1,GB class1, USA V0/HF1).
• ACOUSTIC FOAM - Flame resistance: Euroclass B-s3,d1 (similar to old M1). SOLD IN PAIRS
• Great decorative alternatives.
• Sold in pairs.
®FOAMSORB | ABSORPTION COEFFICIENT 0.95
/INVERTED
aS 0.11 0.12 0.17 0.21 0.30 0.42 0.58 0.68 0.76 0.83 0.91 0.96 0.97 0.96 0.98 0.99 1.01 1.01 1.01 1.02 1.01 1.01 1.02 1.03
1.4
1.2
1.0
0.8
0.6
0.4
0.2
Hz 50 63 80 100 125 160 200 250 315 400 500 630 800 1k 1.25k 1.6k 2k 2.5k 3.15k 4k 5k 6.3k 8k 10k NRC
ABSORPTION COEFFICIENT: Values in accordance with the standards: EN 20654, ASTM C423 and EN 11654. Values [<100Hz and > 5K] are Non Standard Values.
REGULAR AND MELAMINE FOAM COLOURS
CREAM GREY LIGHT GREY WHITE
Regular Foam Regular Foam Melamine Foam Melamine Foam
56 IMPORTANT NOTICES
• JOCAVI® accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require.
• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.
• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range. Close attention must be paid to the storage conditions and the acclimatization before, during and after the installation.
• Typical Indoor Comfort Standards state a temperature range of 20ºC - 27ºC (68ºF - 81ºF), and a relative humidity of less than 60%. These would be considered as normal operational levels of JOCAVI® products' range.
• Despite all the standard sizes of all products, this model can be customised upon previous consultation. Sizes may vary slightly due to their production method and some inherent raw-materials characteristics.