Page 6 - ATP_Products_2016
P. 6
WAVYFUSER®/INVERTED
DIFFUSION PANEL
DESCRIPTION Image of 60x60cm models Ref.:WAV060 and Ref.:WAI060 (on the left) and Ref.:WAV120 and Ref.:WAI120 applied (ambient image).
TECHNICAL DRAWINGS
The WAVYFUSER INV® is made of high-quality 100% recyclable ecologic EPS raw 120 120
material. This design results from combining a sequence of concave and convex shapes 60 60
with numerical techniques, which creates a profile surface that optimises the scattering
of diffusion.
This model has two different varieties, male and female, which, when combined in the
assembly, make the diffusion of medium/low frequencies more efficient. Acoustically,
this translates into a more real control of sound reflections in your room, by providing
uniform omnidirectional broad bandwidth diffusion without any other unwanted sound
effect in the room.
The WAVYFUSER INV® is one of the top model of ATP® diffusers set. Its price is highly
reasonable and provides a combination of hemispherical acoustic diffusion with a top-
quality EPS finishing painting.
60 13 60 12
FEATURES MODELS AND SIZES DIFFUSION PANEL
• Average diffusion: 0.57/m2 [>100Hz;<5KHz]. MODELS HEIGHT WIDTH DEPTH WEIGHT
• NRC: 0.21/m2 [>100Hz;<5KHz]. 60 cm 13/12 cm 1/1.1 Kg
• Fire resistance: Euroclass B-s3,d1 (similar to old M1). WAV/I120 120 cm 60 cm 13/12 cm 2/2.2 Kg
• Finished with an ecological paint. WAV/I060 60 cm
• Very easy to install.
• Other colours available upon consultation. SOLD IN PAIRS
• Sold in pairs.
DIFFUSION - ABSORPTION COEFFICIENT 0.57 ®WAVYFUSER |
/INVERTED
0.12 0.12 0.15 0.28 0.30 0.37 0.38 0.43 0.44 0.46 0.50 0.55 0.63 0.64 0.66 0.71 0.75 0.77 0.79 0.78 0.79 0.77 0.77 0.76
aS 0.01 0.02 0.02 0.09 0.13 0.14 0.16 0.19 0.20 0.26 0.31 0.30 0.25 0.26 0.26 0.23 0.20 0.17 0.19 0.21 0.18 0.18 0.16 0.15 0.21
1.4 DIFFUSION
1.2
1.0 ABSORPTION
0.8
0.6 2.5k 3.15k 4k 5k 6.3k 8k 10k AVERAGE
0.4 /NRC
0.2
Values [<100Hz and > 5K] are Non Standard Values.
Hz 50 63 80 100 125 160 200 250 315 400 500 630 800 1k 1.25k 1.6k 2k
ABSORPTION COEFFICIENT: Values in accordance with the standards: EN 20654, ASTM C423 and EN 11654.
DIFFUSION COEFFICIENT: These values were obtained by mathematical calculations and tests carried out in our laboratory.
STANDARD EPS RAL COLOURS
BEIGE YELLOW ORANGE RED PURPLE LIGHT BLUE BLUE GREEN BROWN LIGHT GREY GREY BLACK WHITE
Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to
RAL 1011 RAL 1003 RAL 2001 RAL 3003 RAL 4007 RAL 5010 RAL 5013 RAL 6028 RAL 8019 RAL 7001 RAL 7015 RAL 9005 RAL 9003
IMPORTANT NOTICES
• JOCAVI® accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require. 47
• RAL© is an international independent colour standard system partner for industry, trade, architecture and design. Should be consulted before placing any order.
• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.
• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range.
• Typical Indoor Comfort Standards state a temperature range of 20ºC - 27ºC (68ºF - 81ºF), and a relative humidity of less than 60%. These would be considered as normal operational levels of JOCAVI® products' range.
• Sizes may vary slightly due to their production method and some inherent raw-materials characteristics.