Page 3 - ATP_Products_2016
P. 3
CORALREEF®
DIFFUSION PANEL
DESCRIPTION TECHNICAL DRAWINGS Image of 60x60cm model Ref.:COR060.
60
The CORALREEF® is a 3D controlled dispersion acoustic diffusion panel. It is made of
high-density polystyrene and its finishing membrane provides it with the intended 60 12
acoustic qualities.
Its angular appearance gives dynamics to any space and provides a decorative effect MODELS AND SIZES
and attractive combinations.
This acoustic panel is installed on ceilings and walls. Its low weight makes it the ideal MODELS HEIGHT WIDTH DEPTH WEIGHT
product for use on false ceilings, on its own or alternated with flat modules when 60 cm 12 cm 1.9 Kg
refinement and quality are required. COR060 60 cm
The calculation basis was the theoretical numerical sequence ratio of the primitive root,
CORALREEF® | DIFFUSION PANEL thus providing excellent results of sound diffusion in all directions. The depth factor is
logarithmically varied, and it is, therefore, a three-dimension omnidirectional reflection
panel. Due to its quite sinuous shape with deep recesses, as well as the raw material it is
made of, this product also has a considerable associated absorption coefficient.
Is the top model of ATP® diffusers set.
FEATURES
• Manufactured with High-Density EPS.
• Average diffusion: 0.68/m2 [>100Hz;<5KHz].
• NRC: 0.28/m2 [>100Hz;<5KHz].
• Fire resistance: Euroclass B-s3,d1 (similar to old M1).
• Finished with an ecological paint.
• 100% recyclable.
DIFFUSION - ABSORPTION COEFFICIENT 0.68
0.09 0.22 0.34 0.43 0.59 0.62 0.68 0.73 0.65 0.66 0.69 0.74 0.70 0.68 0.66 0.68 0.72 0.75 0.76 0.72 0.70 0.62 0.58 0.49
aS 0.00 0.00 0.02 0.06 0.07 0.10 0.21 0.36 0.50 0.39 0.28 0.22 0.26 0.29 0.31 0.24 0.20 0.17 0.18 0.13 0.11 0.09 0.07 0.08 0.28
1.4
1.2
1.0
0.8
0.6
DIFFUSION
0.4
0.2 ABSORPTION
Hz 50 63 80 100 125 160 200 250 315 400 500 630 800 1k 1.25k 1.6k 2k 2.5k 3.15k 4k
5k 6.3k 8k 10k AVERAGE
/NRC
ABSORPTION COEFFICIENT: Values in accordance with the standards: EN 20654, ASTM C423 and EN 11654. Values [<100Hz and > 5K] are Non Standard Values.
DIFFUSION COEFFICIENT: These values were obtained by mathematical calculations and tests carried out in our laboratory.
STANDARD EPS RAL COLOURS
BEIGE YELLOW ORANGE RED PURPLE LIGHT BLUE BLUE GREEN BROWN LIGHT GREY GREY BLACK WHITE
Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to Similar to
RAL 1011 RAL 1003 RAL 2001 RAL 3003 RAL 4007 RAL 5010 RAL 5013 RAL 6028 RAL 8019 RAL 7001 RAL 7015 RAL 9005 RAL 9003
IMPORTANT NOTICES
44 • JOCAVI® accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require.
• RAL© is an international independent colour standard system partner for industry, trade, architecture and design. Should be consulted before placing any order.
• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.
• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range.
• Typical Indoor Comfort Standards state a temperature range of 20ºC - 27ºC (68ºF - 81ºF), and a relative humidity of less than 60%. These would be considered as normal operational levels of JOCAVI® products' range.
• Sizes may vary slightly due to their production method and some inherent raw-materials characteristics.